TRACK TOOLS
Ferrule Cutter (0111/111007) Intended for use where the ferrule can be
proven difficult to remove manually. Please note an suitable impact wrench
is required to utilize the product.
DTS 'TBAR' Insulated Ferrule Extractor (0111/109924)
- Consistant removal of ferrules on both S&C and plain line.
- Weighs only 2.6KG for easier handling.
- Conforms to BS8020: 2011.
Documents
-
Ferrule Cutter
Ref. 0111/111007
Designed to be used where ferrules are proven difficult to remove with a 'TBAR' ferrule extractor.
-
Ferrule Extractor
Ref. 0111/109924
Consistant removal of ferrules on both S&C and plain line.
DTS Heat Retainer
A pre-formed universal Heat Retainer used to cover the point heating strip
on stock rails.
It reduces energy costs and retains heat in the switch area.
Documents
-
Certificate of Acceptance
Cert No. PA05/05217
Scope of Acceptance
A pre-formed heat retainer lined with Silica gel, trimethylsilylated: silica aerogel insert which is used to cover the point heater strip on stock rails. -
Installation Instructions (Heat Retainer)
The use of point insulation considerably decreases the operation costs due to the lower power consumption at the same availability of the point.
